Customize ECO PRO Artwork | PROXY Supply Co.

Device color

ECO PRO is a translucent, color-injection-molded housing. Choose from the approved stock colors, or request a custom Pantone match.

Custom color OEM REQUEST

Pick a shade Explore a color direction visually. This gives a HEX value, which is an on-screen reference, not a Pantone match.

Pantone reference IF KNOWN

Enter the official Pantone reference, not a HEX value.

On-screen color is approximate. Your confirmed Pantone reference will be used for production.

Your Artwork

Each surface is set up independently; your original files are always submitted untouched.

You are setting up the front surface. Use the buttons above to switch.

Upload & place artworkUpload logos, graphics, or finished text artwork. Click to choose a file, or drop it here. Position it visually on the device. PNG, JPEG, or PDF · 15 MB max. No artwork on this surfaceIntentionally leave this surface undecorated.

Artwork Colors

Colors detected in the artwork you uploaded above.

Have official brand colors? Add the Pantone reference so the factory can match them precisely. This does not change your uploaded artwork.

Position Your Artwork

Use the Front / Back toggle above the preview to work on each surface. Drag the artwork on the device and keep it inside the marked printing area. The marked boundaries are derived from the factory-supplied 1:1 dieline.

Artwork type

Choose based on your artwork. Logos and graphics require a minimum 6 × 6 mm size; text-only artwork can be as small as 1 × 1 mm.

Size

Rotation

Position from zone center

Artwork must remain fully inside the printable area.

Artwork cannot overlap the oil window.

Artwork overlaps the digital display area. No factory screen keepout has been supplied; PROXY will confirm placement with the factory.

Artwork must be at least 6 mm wide and 6 mm tall when printed.

Low-resolution artworkThis file may not reproduce cleanly at the selected size. A higher-resolution or vector file is recommended.

Finish & Printing

Choose how your ECO PRO should be printed. These apply to the whole device.

Printing method No PrintingUndecorated device UV PrintFull-color, high-resolution graphics Silk ScreenClean, crisp logos and text

Body color

Surface finish · Standard Molded Color
Housing · Translucent PC
The selected stock or custom color is molded into the translucent shell itself; no painted, gloss, matte, soft-touch or plated body finish is offered on ECO PRO.

Review & Submit

Check your configuration. Submitting sends PROXY a factory-ready branding specification for this build.

Customize ECO PRO Artwork.